Kontakta leverantören

Ms. Emily Cui
Lämna ett meddelandeGrundläggande information
Modell nr: SYS120VDC12000W
Produktbeskrivning
APM 6U hög DC-källsystem uppfyller din begäran om 10 kw programmerbar strömförsörjning ! Ger ger dig flexibilitet att mixa och matcha för att möta specifika testkrav. Serieanslutning av 2U single dc rack mount nätaggregat gör spänning upp till 360V och max ström av 120A i parallell anslutning.
Användningsområde :
Denna serie är tillämplig på flera sektorer som el-, belysnings- och luftfartssektorer, och det kan också tillämpas på företagets produktionstest.
Produktfunktioner:
● Med exakt spänning och strömmätningskapacitet.
● Kodad knapp, multifunktionellt tangentbord.
● Standard RS232 / RS485 / USB / LAN-kommunikationsgränssnitt, GPIB är valfritt.
● Spänningsfallskompensation för fjärranalys.
● Utrustar med LIST-vågformsredigeringsfunktion.
● Använd kommandot för standardkommandon för programmerbar instrumentation (SCPI).
● Har erhållit CE-certifiering.
Teknisk specifikation:
ltem | MODEL | SYS120VDC12000W | |
INPUT | |||
1 | Voltage | 190~265VAC | |
2 | Frequency | 47~63Hz | |
3 | Phase | 3 Phase,4Wire+Groud/Y Connect | |
4 | Max.Current | 75A | |
5 | Input Power Max | 15kW | |
6 |
Power Factor at 220VAC Input ,Full Load |
0.98 Min. Active PFC | |
7 | Efficiency | >88% Max @Full Load and Units=4kW Model | |
OUTNPUT (Parallel Mode) | |||
8 | Output Voltage | 0~120V | |
9 | Output Current | 0~120A | |
10 | Output Power | 12kW Max | |
11 | Load Regulation | Voltage | 120mV |
12 | Current | 0.12A | |
13 | Line Regulation | Voltage | 0.02%F.S.+30mV |
14 | Current | 0.02%F.S.+15mA | |
15 | Voltage Setting | Range | 0~120V |
16 | Resolution | 1mV | |
17 | Accuracy |
0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc |
|
18 | Current Setting | Range | 0~120A |
19 | Resolution | 10mA | |
20 | Accuracy | 0.1%+0.10%F.S | |
21 | Ripple | Voltage | 160mVp-p/30mVrms |
22 | Current | 90mA(Full Range),15mA(TYP Value) | |
MEASUREMENT (Parallel Mode) | |||
23 | Voltage Setting | Range | 0~120V |
24 | Resolution | 1mV | |
25 | Accuracy |
0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc |
|
26 | Current Setting | Range | 0~120A |
27 | Resolution | 10mA | |
28 | Accuracy | 0.1%+0.10%F.S | |
OUTNPUT (Series Mode) | |||
29 | Output Voltage | 0~360V | |
30 | Output Current | 0~40A | |
31 | Output Power | 12kW Max | |
32 | Load Regulation | Voltage | 120mV |
33 | Current | 0.12A | |
34 | Line Regulation | Voltage | 0.02%F.S.+30mV |
35 | Current | 0.02%F.S.+15mA | |
36 | Voltage Setting | Range | 0~360V |
37 | Resolution | 10mV | |
38 | Accuracy |
0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc |
|
39 | Current Setting | Range | 0~40A |
40 | Resolution | 0.1mA | |
41 | Accuracy | 0.1%+0.10%F.S | |
42 | Ripple | Voltage | 120mVp-p/22.5mVrms |
43 | Current | 120mA(Full Range),20mA(TYP Value) | |
MEASUREMENT (Series Mode) | |||
44 | Voltage Setting | Range | 0~360V |
45 | Resolution | 10mV | |
46 | Accuracy |
0.1%+0.1%F.S. at 0< Ouput Voltage =<75Vdc 0.05%+0.05%F.S. at 75Vdc< Ouput Voltage =<1200Vdc |
|
47 | Current Setting | Range | 0~40A |
48 | Resolution | 0.1mA | |
49 | Accuracy | 0.1%+0.10%F.S | |
Extra Function | |||
50 | Remote Sense | Range | 5V(DC), Max. Total power less than rated power |
51 | Comm. Respondence. | 50ms | |
52 | Graphic Display | VFD | |
53 | Operation Key Feature | Soft key,Numberic key,Rotary Knob | |
54 | Rack mount Handles | Yes | |
55 | FAN | Temperature Control | |
56 | Protection Circuits | OCP, OVP, OPP, OTP,FAN | |
57 | Interface | USB, RS485, RS232, LAN(Standard); GPIB(Option) | |
Remote Control Input/Output signal characteristics | |||
58 | Remote Input signal | Not Support | |
59 | Remote output signal | Not Support | |
Environmental | |||
60 | Operating Temperature | 0°C~40°C | |
61 | Storage Temperature | -20°C~70°C | |
62 | Altitude | 2000m | |
63 | Relative Humidity | 10%~90%, non-condensing | |
64 | Temperature Coefficient | 100ppm/°C at Voltage, 300ppm/°C at Current | |
Mechanical | |||
65 | Dimensions(W*H*D) | 600.0*736.0*700.0 mm | |
66 | Package Dimensions(W*H*D) | 720.0*910.0*820.0 mm | |
67 | Unit Net Weight | 54kg+15kg*N(REF) | |
68 | Accessories Weight | 0.4kg | |
69 | Shipping Weight | 94kg+15kg*N(REF) | |
Regulatory Compliance | |||
70 | CE Mark | Installation Overvltage Category II;Class II equipment;indoor use only. |
* FS representerar det maximala värdet av uteffekten.
* N står för antalet installerade nätaggregat och N är större än 1.
Produktkategorier : DC-källsystem > 120V DC-källsystem