Home > Produkter > DC elektronisk belastning > 1200V DC elektronisk belastning > Elektronisk lasttest 1200V 26400W
  • Produktbeskrivning
Overview
Produktegenskaper

Modell nrEL1200VDC26400W

MärkeApm

HärstamningKina

Input Voltage0~1200V

Input Current0~960A

Input Power0~26400W

Voltage Readback Accuracy0.015%+0.015%F.S.

Current Readback Accuracy0.04%+0.06%F.S.

Power Readback Accuracy0.1%+0.1%F.S.

Height13U

Warranty2 years

InterfaceRS232/RS485/USB(Standard)

Leveransförmåga och ytterligare inform...

FörpackningTrälåda

Produktivitetother

TransportfordonOcean,Air

HemortenKINA

Stödjaother

CertifikatISO9001/CE/ROHS/CSA/UL

HS-nummer8543709990

HamnDHL

Betalning TypT/T

IncotermEXW

Emballage og levering
Sælgende enheder:
Piece/Pieces
Pakketype:
Trälåda
Billedeksempel:

APM techonogies programmable DC electr onic load E L1200VDC26400W s upports CV, CC, CR and CP these 4 basic operating modes, as well as CV+CC, CV+CR, CR+CC these 3 complex operating modes. This series Dc Electronic Load can be applied to battery discharge, DC charging station and power electronics and other electronics products.

APM techonogies also have 200V DC Electronic Load and 600V DC Electronic Load for lower voltage options.Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity to make Dc Electronic Load System with 200V DC Electronic Load System,600V DC Electronic Load System,1200V DC Electronic Load System.


Functions & Advantages:

Flippable Front Panel and Color Touch Screen
This series programmable DC electronic load is equipped with flippable front panel for 4U, 7U, 10U and 13U height models. Together with a large color touch screen provides simple and fast operation for customer. Real-time update of display input data, status and graphical display makes it more intuitive.


Multiple Operating Mode

This series programmable DC electronic load provides four kinds of basic operating mode including CV (constant voltage), CC (constant current), CR (constant resistance), CP (constant power), to satisfy a wide range of test requirements.


Adjustable CV Loop Speed
This series electronic load supports CV loop response speed setting to FAST, NORMAL or SLOW to satisfy different test requirements. This function may avoid the inaccurate measurement or testing fail caused by the response speed mismatch between the load and the power supply, which is possible to improve test efficiency and reduce costs on the equipments, time and expenses.


Dynamic Load

This series electronic load can be switched quickly between different values in the same operating mode, including CC dynamic mode, CV dynamic mode, CR dynamic mode and CP dynamic mode, CC/CR high speed dynamic mode up to 50kHz. This function is suitable for transient test of power supply, test of battery protection characteristic and battery pulse charging etc. Dynamic mode test has continuous mode, pulse mode and toggle mode.


Sine Wave Dynamic Load
This series electronic load supports sine wave loading function which allows to load sine wave,can be used for impedance analysis test of fuel cells.


Dynamic Frequency Sweep Function

This series electronic load provides a unique constant current dynamic sweep to use frequency conversion to find out the UUT voltage of worst case.
This CC dynamic sweep allows the user to edit two load levels, start frequency, end frequency, step frequency, dwell etc.
The sampling rate is up to 500kHz, which make it can simulate different loading conditions for most test requirements.


Battery Discharge Test
This series electronic load has battery discharge function, and can perform discharge test under CC, CR or CP mode. The DC load can set end voltage or time to stop loading correctly and make sure the battery is not damaged due to over discharge. The user can set stop conditions, whenever met any condition, the load will stop loading and counting automatically. During the test, users can observe battery's voltage, discharging time and already-discharged-capacity.

Auto Mode

This mode allows automatically switches among CV, CR, CC and CP modes. It is suitable for lithium ion battery charger testing to get a complete VI charging curve. This flexible auto mode also enormously improve test efficiency.


OCP/OPP Tests

This series electronic load provides OCP and OPP modes are mainly applied in over-current and over-power points tests. After the testing the load can automatically judge the test result according to the set specifications. Take OPP testing as example, the OPP provides ramped up power for the load to test the UUT voltage whether has reached trigger voltage level and to judge if the protection is acting normally or not.


List Mode

The list function allows user to create waveform files to automatically simulate various complicated loading conditions. The list mode has 10 files, by editing operating mode (including CC, CV, CR,CP, Short and ON/OFF), repeat times, total steps, setting value of each step and step time etc. This function can be applied to the testing of output characteristic and stability for power supply.


Master/Slave Control

This series electronic load provides the user with Master/slave mode, supports parallel connection under different power and same voltage and dynamically synchronized. In Master/slave mode, the user only need to control the master one, the load current will be automatically calculated and downloaded to the slave loads. The Master/slave mode greatly simplifies the operation when increased power is needed.


External Control and Current/Voltage Monitoring

This series electronic load has analog control interface to control the input voltage and current. The external signal 0 to 10V controls the sinking condition from 0 to full scale. Using the external control mode can simulate arbitrary waveform which is ideal for industrial control requirement.
The 0 to 10V analog output signal of V-MON/I-MON terminals represent input to which the terminals belong from 0 to full range.
An external voltmeter or oscilloscope can be connected to display input voltage/current change.




Produktkategorier : DC elektronisk belastning > 1200V DC elektronisk belastning

Företagsöversikt
APM Technologies (Dongguan) Co., Ltd. är ett högteknologiskt företag som är specialiserat på forskningen och utvecklingen (FoU), produktion och distribution av Marine Smart System (MSS), PV Solar inverter, programmerbar strömförsörjning , automatiserat testsystem och automatiserat och automatiserat Tillverkningsutrustning. Vårt företag har kompletta system inom produktplanering, forskning och utveckling, laboratorieexperiment, testning och kvalitetskontroll. Dessutom har vi passerat ISO 9001 -standardcertifieringar. APM Technologies FoU -team består av mer än 100 personal som omfattar Ph.D. och masterexamen och äldre experter inom de relaterade branscherna. Genom att samarbeta med ett antal inhemska och internationella forskarteam och upprätthålla ett långsiktigt strategiskt samarbete med ledande högskolor och universitet kan vårt företag se till att produkter och tjänster leder branschen. Genom att tillämpa våra professionella tekniker och tekniker för att kontinuerligt innovera och bryta igenom har APM -teknologier hittills använt ett antal uppfinningspatent och redan fått ett antal verktygspatent, designpatent, mjukvaruhovage och andra relaterade patent. Våra produkter har passerat CE, VDE, SAA, CQC, CSA, FCC, etc. Certifieringar. APM -teknologier från början till nutid, och från det förflutna till framtiden, har alltid upprätthållit företagets anda av "ständig strävan efter excellens" för att ge våra kunder de "24 timmar om dagen med fortsatta tjänster".
Företagsfoton
Produktionscertifiering
Ladda ner
Home > Produkter > DC elektronisk belastning > 1200V DC elektronisk belastning > Elektronisk lasttest 1200V 26400W
E-posta denna leverantör
  • *Ämne:
  • *Till:
    Ms. Emily Cui
  • *E-post:
  • *Meddelande:
    Ditt meddelande måste vara mellan 20-8000 tecken
Skicka förfrågan
*
*

Hem

Product

Phone

Om oss

Förfrågan

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Skicka